For Inquiry : (022) - 2311 2340 / 2819 8899
Email : firstname.lastname@example.org
Copyright 2009 industrialkeys.com
CYLINDRICAL DOWEL PINS are used either to retain parts in a fix position or to preserve alignment.
CYLINDRICAL DOWEL PINS are MANUFACTURED as per IS : 2393
TYPE A, B, C and D is recommended for un-hardened pins.
TYPE E is as per IS : 6689 recommended for hardened pins.
FOLLOWING ARE 5 TYPES OF PINS RECOMMENDED IN THE ABOVE STANDARDS.
A GROOVED PIN is Cylindrical Pin with three equal spaced Grooves. They are rolled or pressed into the pin stock outward within controlled standard limits. When required and no remaining is needed. GROOVED PINS are resistant to loosening from shock and vibration and may be reused without appreciably reducing their holding force.
PRICES ON REQUEST: Prices will be based on type, size and quantity.
Our objective is to provide our customers with the best value; the lowest installed pin cost. To achieve this objective, our sales strategy focuses on the application engineering approach.
Starting with an analysis of your need and objectives, Our application engineers determine the best Spiral coiled pin for the application. Consideration is not only given to the pin but also to the specifications of the components to the assembled and potential assembly problems. Recommendations and samples are provided for your evaluation.
The versatility of the Spirol coiled pin makes it the ideal fastener to meet the specific engineering and economic objectives of pinning application. Our broad range of standard pins is designed to meet most requirements. If a special diameter, length, duty, material, tolerance or pin configuration is needed, We are ready to assist you.
Spirol Dowel Pins are manufactured from suitable grade of High Carbon Spring Steel material as per
DIN -7343 -7344 standards. These are available in sizes from 2 mm X 6 mm length to 16 mm X 100mm length.
Spring Dowel Pins
Spring Dowel Pins are manufactured from suitable grade of High Carbon Spring Steel material as per DIN - 1481 or IS - 5988 standards. These are available in sizes from 1.5mm X 8 mm length to 12 mm X 70 mm length.
Spring Dowel Pins (Sleeves) are available in light or heavy Types.
Spring Dowel Sleeve Pin
DIN - 1481 or IS - 5988
External and Internal Threaded Taper Pins
The External and Internal threaded Taper Pins are made & supplied in soft condition. They are manufactured as per IS : 3524 of 1966 and DIN 7978 of 1963.They also could be manufactured to DIN 7977, DIN 258 or to customers specifications. The standard Taper is 1:50.
They are manufactured as per IS " 3524.
THE FOLLOWING IS THE TYPE OF PINS RECOMMENDED EXTERNAL & INTERNAL THREADED TAPER PINS
DIN - 1472 & IS - 7385
DIN - 1471 & IS - 7368
DIN - 1473
DIN - 1470 & IS - 7384
DIN - 1474 & IS - 7386
DIN - 1475 & IS - 7383
DIN - 1475
DIN - 1469
Grooved Pin with Under Cut
Straight Pin with Guide End
Grooved Pin with Round Head